Fix Windows 10 can’t connect to this network – When we try to connect a laptop to a Wi-Fi network, we may get an error message saying that we can’t connect to this network.

This problem is common with Windows 10 users. This may be due to a change in the wifi password, a configuration error or a driver problem.

Correcting the inability to connect Windows 10 to this network

How can I solve a situation where Windows 10 cannot connect to thisnetwork?

So follow all the steps correctly: Correct the fact that Windows 10 cannot connect to this network.

1. Turn off the power saving device on WiFi

The first thing to do is to turn off the power saving feature of your Wi-Fi adapter in Windows 10.

Details :

This function has the basic function of turning off the adapter when the battery is low and can cause the adapter to not work when trying to connect a laptop to WiFi.

Follow these steps:

First go to the control panel and then select the Network and Share Center menu.

Then click the Change Adapter Settings tab.

You’ll see a power supply on your laptop. Right-click on the Wi-Fi adapter you are using and select Properties.

Click on the Customize button in the Properties window.

Then click the Power Management tab > turn off the computer to turn off this device to save energy.

Press the OK button. Close all configuration windows and restart the laptop. After the restart, try to reconnect to the Wi-Fi network, which was problematic, now it should work.

2. Rebooting the WiFi adapter

Rebooting the adapter can also help solve WiFi network problems. Cannot connect to this network in Windows 10.

As with other devices in general, restarting the WiFi adapter has the same effect, updating the device and its configuration.

Before you try anything else, you need to give some advice.

Perform the following steps: Correct the error that Windows 10 cannot connect to this computer.

First go to Control Panel and then select Network and Sharing Center.

Click the Change Adapter Settings menu.

Right-click on the Wi-Fi adapter > select Disable.

Wait until the icon turns grey, then right-click again and select Activate.

The adapter turns back on. This closure process will have a restarting effect.

3. Check the status of the Internet Service Provider used.

You should also check that the work of the ISP whose services you are using is not interrupted. Therefore, the problem that the laptop cannot work in WiFi mode is not always due to a bug in the laptop or the device being used. This may be the case if your ISP has a problem.

To find out, you can use other devices to access the network you are using. For example with another smartphone, tablet or laptop. You can also ask people who use the same service provider.

If the ISP network has problems, all we can do is wait until the network is normalized. Skip all the tips in this manual.

4. WiFi forgotten

If the access point changes the password, each device must also change the password if you want to use it. The problem is that sometimes the WiFi of a laptop does not show a dialog box for changing the password.

When we try to connect to an access point, Windows keeps trying to use the old password, and the connection fails.

One of the easiest ways to overcome this problem is to use the Forget feature to remove old passwords and configurations and create new ones.

Perform the following steps: Correct the fact that window 10 cannot connect to this network.

Go to Settings > select Network and Internet .

From the left pane, tap the Wi-Fi tab > select the Manage known networks menu.

You’ll find a list of all the Wi-Fi networks your laptop is connected to.

Click on Wi-Fi, which is a problem> click on the ‘Forget’ button.

Close all configuration windows and re-establish the Wi-Fi connection by entering a new password.

5. Set the IP address and DNS to automatic mode.

Manually setting up an IP address and DNS can also cause your laptop’s Wi-Fi connection to fail. If you are not familiar with the theory, it is best to use automatic IP and DNS.

By default, the Wi-Fi settings in Windows 10 are set automatically, but for some reason you can change them manually.

Filling in the wrong IP and DNS actually prevents the connection to the Internet, sometimes a connection can be established, but the information does not seem to have access to the Internet. So to solve the problem, we can go back to the automatic settings.

Perform the following steps: Correct the fact that window 10 cannot connect to this network.

Open the control panel > select Network and Sharing Center.

Then select Change Adapter Settings.

Right-click on the Wi-Fi adapter > select Properties .

Select Internet Protocol Version 4 (TCP / IPv4) > then click Properties

Select the Auto-retrieve IP address and Auto-retrieve DNS server address checkbox.

Close all setting windows. Reconnect to a Wi-Fi network whose settings are set to automatic mode.

6. Reset network configuration via PDC

Tips for laptops You cannot connect to this network in Windows 10 and then restart the network from the command line.

This problem can be related to many things, it is often caused by a configuration error that we do not know. The most effective way to solve this problem is to fully reboot the network, which can be done with the cmd command.

Perform the following steps: Correct the fact that window 10 cannot connect to this network.

Open a command prompt with administrator rights, so press the Windows key > type cmd > a command prompt appears > select Run as Administrator in the right pane.

When the cmd program opens, type the following commands in sequence by pressing the Enter key.

Reset the Winsock gauze

deposit of the ip network

ipconfig / Release

ipconfig / update

ipconfig/horses

Explanation of each of the above command line functions:

  • netsh winsock reset> restores the default Windows socket configuration (wsock32.dll)
  • netsh int ip reset> resets the TCP/IP configuration to the default state.
  • ipconfig / release> deletes the current IP configuration
  • ipconfig / renew> create a new IP configuration
  • ipconfig / flushdns> erases the DNS cache.

When you’re done, reboot your computer, try to reconnect to WiFi, which was problematic, and see if it works or not. If you still can’t do it, go to the next step.

7. Starting network troubleshooting

We can use the Windows 10 network troubleshooter to determine the cause of the WiFi problem. This function performs the diagnosis automatically and makes recommendations for its correction.

Perform the following steps: Correct the fact that window 10 cannot connect to this network.

First, open Settings > select Update and Security > click the Troubleshooting tab > click the Advanced Troubleshooting menu.

Tap the Internet Connections button > tap Start Troubleshooting.

Wait for the diagnostic tool to complete the diagnosis and then you will see the problems detected and the recommendations for solving them. Perform the following steps as recommended by your convenience store.

Then touch Network Adapters > touch Start Troubleshooting.

Repair as recommended by a qualified service technician.

8. Reboot and reset router or modem

You may also need to reboot the router or modem used to solve this problem.

Restarting and restarting are two different things. To restart the device, simply turn it off and on again.

The way it can be reset depends on the type and brand of the modem used. You can read how to do this in the manual available at the time of purchase or on the official website.

9. Reinstalling the driver

The next step is to reinstall the driver to update the driver file and replace the old with the new one. The reinstallation process is automatic, so you don’t have to manually search for drivers.

Perform the following steps: Correct the fact that window 10 cannot connect to this network.

Open the Device Manager by pressing the Windows + R key on your keyboard > and enter devmgmt.msc > press OK.

Click the small arrow on the device’s network adapter > locate your laptop’s Wi-Fi driver > right-click > select Remove Device.

Then restart the computer. After activation, Windows 10 automatically restores the previously uninstalled Wi-Fi driver.

10. Resetting the PC

If you have been here, but none of the above tips have worked, the only option left is to reset your computer. Fortunately, Windows 10 already has a very easy to use reset function and you don’t have to use a bootable CD or floppy disk like in previous versions of Windows.

Details :

Conclusion:

Here are a few clues to try to find out that Windows 10 cannot connect to this network. The problem is that a laptop cannot connect to the internet because of a bug, which hopefully will help.

Don’t forget to bookmark and visit Techadvice.com every day as you will find the latest Android games, Mod Apk and ETC apps that we will update daily.

bell can't connect to this network,laptop won t connect to wifi reddit,windows 10 not connecting to jiofi,gpd win can t connect to this network,archer t9e can t connect to this network,windows 8 can t connect to wifi,windows 10 internet connection issues,how to find a wifi network on windows 10,wifi not finding network,surface pro not connecting to wifi,why can t i get wi-fi,how to fix internet connection on windows 7,windows 10 update killed wifi,windows 10 1903 wifi issues,windows 10 update problems 2020,windows 10 update august 2020,windows 10 updates download,windows 10 2004 wifi disconnects frequently,can t connect to this network 5g,can t connect to this network windows 10 2019,windows 10 wifi not working after update,windows 10 no wifi option in settings,windows 10 wifi disconnects frequently,windows 10 wifi not turning on,windows 10 wifi no internet, secured,windows 10 wifi connected but no internet,windows 10 1903 network adapter issues,windows 10 1909 wifi issues,windows 10 1903 wifi keeps disconnecting,windows 10 may 2020 update wifi problem,uninstall windows 10 update 1903,can t uninstall kb4512941,suddenly can't connect to this network,windows 10 can't connect to this network reddit,windows was unable to connect to this network,can't connect to this network windows 10 hp laptop,windows 10 can't connect to this network 2019,kenapa can't connect to this network windows 10,can't connect to this network windows 8

You May Also Like

How To Find Out An Unknown Caller Number

We sometimes have to deal with calls from unknown numbers. It’s becoming…

5 Management Skills To Develop Today For A Thriving In-House Legal Team Tomorrow

Companies need experienced leaders to operate in a global economy. And now…

Are You Prepared for Cybersecurity in the Boardroom?

Works councils have many aspects of responsibility. Cybersecurity is perhaps one of…

6 Best Rust Server Hosting – Rent Rust Servers For Cheap in 2021

Last updated on 3. December 2020 at 11:18 a.m. Do you like…