Root Samsung Galaxy A30s SM-A307FN/G/GN/GT

If you own a Samsung Galaxy A30s SM-A307FN/GN/GT Android 10 smartphone and you also want to customize this smartphone, then you are on the right page. If you are an Android enthusiast and want to install root and TWRP recovery on your beloved device, then you are at the right page. In due time, we will guide you through the process of installing TWRP and rooting the Samsung Galaxy A30s SM-A307FN/GN/GT.

The Samsung Galaxy M30s features the Exynos 9611 (10nm) CPU/Octa-Core chipset specifications (4×2.3GHz Cortex-A73 and 4×1.7GHz Cortex-A53), 6.4in, 100.5cm2 (~84.2% screen-to-shell ratio), Super AMOLED, 420 nits (type), 1080 x 2340 pixels, 195:9 ratio (density ~403 ppi), internal storage/ RAM 64GB 4GB RAM, 128GB 4GB RAM, 128GB 6GB RAM, 48MP main camera, f/2.0, 26mm (wide), 1/2.0″, 0.8µm, PDAF / 8MP, f/2.2, 12mm (ultra wide), 1/4.0″, 1.12µm / 5MP, f/2.2, (deep), 16MP, f/2.0, 26mm (wide), 1/3.06″, 1.0µm, 4000mAh Li-Po battery, non-removable, 15W fast charge.

The TWRP has an attractive hardware design and user interface (UI). If you follow this guide, you can install the latest TWRP for the Samsung Galaxy A30s SM-A307FN/GN/GT. You can download TWRP Recovery from the links in the required section of this article. Please note that this is the official TWRP recovery and only for the Samsung Galaxy A30s SM-A307FN/GN/GT (Please confirm the model by going to “Settings”>”About”). The following process is only for rooting and installing TWRP on Samsung Galaxy A30s SM-A307FN/GN/GT, please do not test this method on other devices.

If you want to exploit the full potential of your Samsung Galaxy A30s SM-A307FN/G/GN/GT hardware, rooting and flashing TWRP is an important task. ROMs often have limited and unsupported functionality in terms of customization. If you have a root device and flash TWRP recovery, you can install any custom ROMs, mods, kernels, Xposed, etc., as well as many applications that require root access to function properly.

ALWAYS pay attention to how you run the Blackview BV6800 Pro and install TWRP Recovery.

Brief information and benefits of TWRP recovery

TWRP (Team Win Recovery Project) is an open source community development project. By flashing TWRP, you can install any custom firmware on your device, boot your smartphone, change zip files for settings, Xposed modules for settings, root and unroot processes with one click. You can also create a full backup of Nandroid and restore it later, create a flash image file with one click, remove bloatware, overclock and underclock. With TWRP, you can easily erase, cache and clean up data after flashing an image file to reflect changes and correct minor errors caused by caching.

To install TWRP, your Samsung Galaxy A30s SM-A307FN/GN/GT phone must have an unlocked bootloader. This means that you must first unlock the bootloader to install the root of the device, and also to perform a configuration.

Disclaimer : Although covers everything very clearly so that our readers get exactly what they want, there is still a small chance that major problems can arise from the steps mentioned here. Therefore, it is in the interest of the user to follow the steps very carefully to avoid any accidents with the device.
Activating and deactivating custom ROM firmware will undoubtedly void your device’s warranty, and is in no way responsible for invalid warranties or damaged devices.


Be sure to check the model number, it should be listed :

  • Samsung Galaxy A30S [Models: SM-M307F, SM-M307FN, SM-M307F/DS, SM-M307FN/DS, SM-M3070].

Be sure to read the disclaimer carefully before using your phone regularly and agreeing to continue taking this risk.

The phone must be 70% charged, otherwise complications may occur during the experiment. Take a chance and try to charge it fully.

If you are going to root your phone or install a custom ROM, it is a good idea to back up your phone. Back up all your media, such as photos, videos and everything on your PC and contacts in the cloud.

You must enable the USB debugging option by going to Settings, Applications and Developers.

Downloads for rooting the Samsung Galaxy A30s SM-A307FN/GN/GT Android 10 One UI 2.0

Download the Samsung USB drivers here (if you already have drivers installed on your PC, ignore this).

ALWAYS read how to root the ZTE L6 blade and install TWRP recovery

Download Odin from here.

Download the TWRP recovery for the Samsung Galaxy A30s SM-A307FN/GN/GT here :

Repair TWRP 3.5.0
( link)

Download SuperSU from Chainfire from here.

Download Magisk Manager from here.

Samsung Galaxy A30s SM-A307FN/GN/GT unlocks Android 10 One UI 2.0

Step 1: Make sure you have already activated USB debug mode and OEM unlocking on your smartphone. To do this, go to Settings > About > and tap “Build Number” 7 to 10 times in a row. This will enable USB debug mode and OEM unlocking. So obviously, the process is not complicated.

Step 2: Next, turn off your Samsung Galaxy A30s SM-A307FN/G/GT device. Now it’s time to switch to boot mode. To switch to boot mode, press the Volume + and Volume – keys simultaneously and then connect your smartphone via a USB data cable. When the device enters boot mode and the boot screen appears, simply press the Volume key and the Samsung Galaxy A30s SM-A307FN/GN/GT boot loader will be unlocked.

Note: Unlocking the bootloader removes the user data from the device. After configuring the device, check the OEM unlock in the settings, in the case of back cases it will be locked again.

Steps to flash/install TWRP 3.4.0 on Samsung Galaxy A30s SM-A307FN/GN/GT Android 10 One UI 2.0

Step 1: Assume that you have already downloaded the latest version of Odin and TWRP Recovery for your device from the sample area above. If the latest version of Odin is not working for your device or you are experiencing problems, just download the correct version of Odin software.

Step 2: Make sure you have already downloaded TWRP Recovery for your Samsung device. Then, extract the Odin archive file on your computer and install the latest Samsung USB flash drives.

Step 3: When the device is turned off, press the “On/Off+Volume Down+Home” buttons at the same time and the device will go to boot mode. If this key combination does not work for your device, search Google for your device’s key combination.

Step 4: Now connect your Samsung device to your computer via the USB cable. Next, navigate to the folder where the Odin files were extracted and right-click on the Odin executable file, then click “Run as administrator”.

Step 5: The interface should show something like “ID:COM” in the list below, and check the interface below carefully.


Step 6: Note the “ID:COM” and the blank field below it that turns blue after the device is detected. The device should be detected if the correct drivers are installed on your computer.

READ ALSO how to root the Alcatel Pixi 4(5) 5010 and install TWRP recovery

Step 7: Then click “AP”, then go to the firmware archive, find the .tar.md5 file and select it after clicking “AP”.

Note: There is a PIT partition in the distribution partition. Do not place any files under the “PIT” partition and also make sure that “repartitioning” is not enabled. Just check the boxes “Auto Reset” and “F.” Reset Time. Reset Time”.

Step 8: Once the TWRP (. img) file is uploaded to the AP field, the flashing or installation process can begin. Be sure not to touch the USB cable during flashing.

Odin Pass

Step 9: If all goes well, at the end you will see the message “PASS” or “RESET” in green, which means that the TWRP firmware recovery process for your device has been successfully completed and it is now in TWRP recovery mode. At this point your device will automatically reboot, don’t panic, this is normal. You can now disconnect the device from the computer.

How to connect Samsung Galaxy A30s SM-A307FN/GN/GT to Android 10 a Install the 2.0/Magisk or SuperSU user interface

Make sure you have downloaded SuperSU or Magisk Manager (link in the required section of this article). Then, hop on the stairs.

Note: You can use Magisk Manager or Super SU, but only one, so choose wisely. If you’re not sure, go to Magisk Manager.

Step 1: Transfer the downloaded SuperSU or Magisk Manager file to the internal memory / SD card of the Samsung Galaxy A30s SM-A307FN/G/GT.

Step 2: Now you just need to start the recovery. You can optionally back up the ROM through the TWRP interface. However, I still recommend backing up the ROM. Because if the process fails, you can create a flash ROM.

Install TWRP 3;0

Step 3: Press “Install”, then navigate to the file “” or “” and drag the cursor over the file to confirm flashing (at the bottom of the screen). The Magisk/ SuperSU flash process has started and will take a few seconds.

Congratulations, you now own the Samsung Galaxy A30s SM-A307FN/GN/GT and the TWRP is installed. You can now install Xposed Framework and customize your smartphone at your convenience. If you want to check it, you can download and check the root status through the Root Checker application.

Frequently asked questions

How do I install the Samsung SM A307FN?

How to power Samsung SM-A307FN with Odin – Repair my cell phone

How do I operate the Samsung A30 SM A305F?

The Samsung Galaxy A30 SM-A305F/FN/GN Android 10 with …

How do I anchor my A30?

A guide on how to power the Samsung Galaxy A30 without a PC …

samsung a307fn u2 root file,a307gn twrp,root samsung a30s without pc,a307fn android 10,samsung a30 twrp recovery download,samsung a30 root file android 10,a30s samfrew,a307gn,samsung a30s flash file download,how to flash samsung a30s,odin download,samsung a30 root,a307fn u2 firmware,root samsung a30 android 10,a305f twrp,what is root?,unofficial twrp a30,twrp download,samsung a307fn root file u2,a30s twrp,a307fn u2 twrp,how to root samsung a30 without pc,samsung a307fn twrp recovery,samsung a30s twrp recovery download

You May Also Like